Herunterladen Diese Seite drucken

Snap-On CTCRUD861 Übersetzung Der Originalanleitung Seite 6

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 44
Safety warnings specific for
polishing operations:
• Do not allow any loose portion of the polishing bonnet
or its attachment strings to spin freely. Tuck away or
trim any loose attachment strings. Loose and spinning
attachment strings can entangle your fingers or snag on the
workpiece.
Battery Pack Safety
Messages
Risk of explosion or fire.
• Do not store the tool and battery in locations where the
temperature may reach or exceed 120°F (49°C).
• CTC772A/CTCA772A/CTCEU772A/CTCJ772A charger
will not charge battery when temperature is below 32°F
(0°C) or above 113°F (45°C).
• Do not incinerate the battery, even if severely damaged
or completely exhausted. The battery may explode in
fire.
• Cover the battery pack terminals with heavy adhesive
tape after removing the battery pack.
• Do not attempt to destroy or disassemble the battery
pack or remove any of its components.
• Do not charge battery pack using an engine generator
or DC power source.
• Charge battery pack in a well ventilated area.
Explosion or flames can cause injury.
Risk of electric shock.
• Do not disassemble the battery.
• Do not short circuit the battery.
• Charge battery pack only with Snap-on brand chargers
for specified battery packs.
• Disconnect battery pack when not in use, before
servicing and when changing accessories.
• Do not charge battery pack using an engine generator
or DC power source.
Electric shock or fire can cause injury.
Risk of burn.
• Battery leakage may occur under conditions of extreme
usage or temperature.
• Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help.
• Ensure the switch is in the off position before inserting
battery pack.
• When battery pack is not in use, do not place it in a
clothing pocket.
Battery leakage or sparks may cause burns or fire.
ZCTCRUD861CE Rev B
EN
EN
Risk of short circuit and fire.
• Do not short battery pack.
• Do not touch the terminals with any conductive
material.
• Avoid storing battery pack with conductive materials
such as nails, screws, coins, and other metallics
objects.
• Do not carry battery pack in aprons or pockets that
contain conductive objects.
Short circuit can cause fire and severe burns.
FCC Regulations
This device complies with Part 15, Subpart B of the FCC
Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
including interference that may cause undesired
operation.
Safety Rules for
Battery Disposal
The RBRC™ Seal on the lithium-ion battery contained in
this product indicates that Snap-on is voluntarily
participating in an industry program to collect and
recycle these batteries at the end of their useful life.
Snap-on's involvement in this program is part of its
commitment to protecting our environment and
conserving our natural resources.
Risk of explosion or fire.
• Do not throw away used batteries! Return your battery
to a Snap-on authorized repair center for recycling.
Explosion or flames can cause injury.
Risk of fire.
• Do not attempt to disassemble the battery or remove
any component projecting from the battery terminals.
• Prior to recycling, protect exposed terminals with
heavy insulating tape to prevent shorting.
Fire can cause injury.
6
(07/24)

Werbung

loading