Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Troubleshooting (cont.)
Problem
Display shows Error Code
"E01".
Display shows Error Code
"E02".
Display shows Error Code
"E03".
Display shows Error Code
"E12".
Display shows Error Code
"E24".
Display shows Error Code
"E25".
Display shows Error Code
"E26".
Display shows Error Code
"E27".
Display shows Error Code
"E28".
Display shows Error Code
"E30".
If your problem is not listed, please contact Customer Support (see page 18).
Declaration of Conformity
Arovast Corporation hereby declares that this product is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU, UK Radio Equipment
Regulations 2017 and all other applicable EU and UK directive requirements. The complete
declaration of conformity can be found at: https://cosori.com/euro/compliance
Manufacturer:
VESYNC (SINGAPORE) PTE. LTD.
6 Raffles Quay, #14-06, 048580 Singapore
Possible Solution
There is an open circuit in the upper temperature monitor of Zone 1.
Contact Customer Support (see page 18).
There is a short circuit in the upper temperature monitor of Zone 1.
Contact Customer Support (see page 18).
The air fryer's overheat protection has activated in Zone 1. Turn
off and unplug the air fryer and allow it to cool completely. If the
display continues to show "E03", contact Customer Support (see
page 18).
There is an error in the upper motor. Contact Customer Support
(see page 18).
There is an open circuit in the upper temperature monitor of Zone
2. Contact Customer Support (see page 18).
There is a short circuit in the upper temperature monitor of Zone 2.
Contact Customer Support (see page 18).
There is an open circuit in the lower temperature monitor of Zone 2.
Contact Customer Support (see page 18).
There is a short circuit in the lower temperature monitor of Zone 2.
Contact Customer Support (see page 18).
The air fryer's overheat protection has activated in Zone 2. Turn
off and unplug the air fryer and allow it to cool completely. If the
display continues to show "E28", contact Customer Support (see
page 18).
There is an error in the lower motor. Contact Customer Support
(see page 18).
EN
15
Werbung
