Werbung
3. Slide in the SpinView
glass shelf's back edge.
4. Mount the SpinView
sure that the clamp pins fit into
special indentations at the base of
the shelf. Check if the SpinView
shelf is mounted properly by moving
it gently forwards and backwards.
4. CONTROL PANEL
Display
1
Freezer Temperature warmer button
2
Freezer Temperature colder button
3
®
clamps on the
®
shelf. Make
®
1
8
7
6
5
5. Place the shelf with the clamps inside
the fridge. Push the shelf until the
clamps lock inside the compartment.
3.6 Door reversibility
Please refer to the separate document
with instructions on installation and door
reversal.
CAUTION!
At every stage of reversing
the door protect the floor
from scratching with a
durable material.
4
3
2
OK
4
Mode
5
Fridge Temperature warmer button
6
ENGLISH
9
Werbung
