Parkside PKH 2000 D2 Bedienungsanleitung Seite 14

3. Switching on: Turn the heating level
switch [ 3 ] clockwise to select the
desired position. The adjustable
positions are shown in the table
below:
Position Meaning
Product turned o
Fan operation
no heating power
Low heating level (Eco)
High heating level
˜ Setting the temperature
INFO: The integrated thermostat auto-
matically turns the heating function on
and o to keep the temperature at a
constant level.
1. Turn the temperature controller
clockwise until it stops to regulate the
temperature at high or low heating
level. The following table shows the
adjustable temperature ranges:
Position Temperature range
Low
Low to medium
Medium to high
High
2. As soon as the desired temperature
has been reached, turn the
temperature controller
clockwise until you hear a
clicking sound.
14 GB
Hints
1. Check whether the product is giving
2. Rectify the problem, if possible,
˜ A
o
o
o
[ 1 ]
˜
1. Set the temperature controller
2.
˜ Overheating protection
m
[ 1 ] counter-
o su cient heat (see "Setting up the
product" :
–
Is the product covered or is it
too close to a wall or another
obstruction?
–
Is the air inlet [ ]
blocked?
–
Is the an blade [
or contact the service hotline (see
Ser ice .
direction
INFO:
The adjustable lou ers
redirect the air ow rom the product.
nly the 3 lou ers 6 ] [
are adjustable.
old the le t handle
handle 5 ] [ o the lou ers
and slide upward or downward
ig. .
INFO: If you have used the product
at temperature range
product run in fan mode (
3 seconds. This will pre ent heat
build-up in the housing.
to position and the heating level
switch 3 ] [ to position.
isconnect the mains plug
the mains outlet.
DANGER! There is usually a reason
for overheating! Overheating can
indicate a risk o re
or the air outlet 4 ] [
] blocked?
allow you to
6 ] [
in the middle
7 ] [ and the right
6 ] [ together
or , let the
or about
1 ] [
[ ] from