Creality Ender 3 V3 KE Benutzerhandbuch Seite 11

Choose "Finish."
•
Confirm your selection and click "Extrude" or "Retract."
•
LAN Printing
Select "Language" and "Server".
•
Add the printer.
•
Confirm the nozzle diameter.
•
Import model files.
•
Set filament type.
•
Adjust parameter configuration and click on "Slice".
•
After slicing is done, click on "LAN printing".
•
Add equipment: You can either "scan to add" or "manually add".
•
Add a device:
•
o Scan Add → Select device. Click "Settings"
o "Network" to view the IP address of the connected network or add a
device by manually entering the IP address.
Device list.
•
Equipment printing information details.
•
Note:
Install Creality Print slicing software by accessing the random data provided on
•
the USB flash drive.
Alternatively, log in to the official website for downloading and installation:
•
https://www.crealitycloud.com/software-firmware/software?type=7.
The current interface is provided for reference only. As the functions are
•
continuously upgraded, please refer to the latest firmware UI on the official
website.
USB Flash Drive Printing
Insert the USB flash drive into any USB port.
•
Select the model from the USB flash drive.
•
Click on "Print".
•
Printing.
•
Tips:
For detailed instructions on using the software, please refer to the slicing
•
software user manual on the USB flash drive.
Saved files must be placed in the root directory (not a subdirectory) of the USB
•
flash drive.
It is recommended to name the files using Latin alphabet, numbers, and common
•
characters.
Do not insert or remove the USB flash drive during the printing process.
•
11