Active Sensing - Yamaha PLG150-DX Bedienungsanleitung

MIDI Data Format
2.1.4.1 PLG150-DX Native System parameter change
This message sets the PLG150-DX SYSTEM block (see Tables <2-1> and
<2-2>).
2.1.4.2 PLG150-DX Native Part parameter change
This message sets the PLG150-DX MULTI PART block (see Tables <2-1>
and <2-3>).
2.1.5 DX Parameter Change
F0H
11110000
43H
01000011
0001nnnn 1NH
GGH
0ggggghh
0ppppppp PPH
VVH
0vvvvvvv
F7H
11110111
2.1.5.1 VCED parameter change
This message sets the VCED block (see Tables <3-1> and <3-2>).
2.1.5.2 ACED parameter change
This message sets the ACED block (see Tables <3-1> and <3-3>).
2.2 Bulk dump
This device uses only the following bulk dump messages.
[ XG BULK DUMP ]
1) XG System bulk dump
2) Multi Part bulk dump
[ PLG150-DX NATIVE BULK DUMP ]
1) Native System bulk dump
2) Multi Part bulk dump
[DX BULK DUMP ]
1) VCED
2) ACED
3) VMEM
4) AMEM
2.2.1 XG bulk dump
This message sets XG-related parameters. Unlike parameter change mes-
sages, a single message can modify multiple parameters.
This message format is as follows.
11110000 F0H
43H
01000011
0NH
0000nnnn
4CH
01001100
SSH
0sssssss
0ttttttt TTH
GGH
0ggggggg
0mmmmmmm MMH
LLH
0lllllll
VVH
0vvvvvvv
: :
KKH
0kkkkkkk
11110111 F7H
Address and Byte Count are given in tables <1-n>.
Byte Count is indicated by the total size of the Data in tables <1-n>.
Bulk dump is received when the beginning of the block is specified in
"Address."
"Block" indicates the unit of the data string that is indicated in tables <1-n>
as "Total Size."
Check sum is the value that produces a lower 7 bits of 0 when ths Start
Address, Byte Count, Data, and the Check sum itself are added.
2.2.1.1 XG System bulk dump
This message sets the XG SYSTEM block (see Tables <1-1> and <1-2>).
2.2.1.2 Multi Part bulk dump
This message sets the MULTI PART block (see Tables <1-1> and <1-3>).
2.2.2 PLG150-DX Native Bulk Dump
This message sets the special parameters for PLG150-DX.
Unlike Parameter change, one message can modify multiple parameters.
50
Exclusive status
YAMAHA ID
N:Device Number
Parameter Group No.
Parameter No.
Data
End of Exclusive
Exclusive status
YAMAHA ID
N:Device Number
Model ID
ByteCountMSB
ByteCountLSB
Address High
Address Mid
Address Low
Data
:
Check-sum
End of Exclusive
11110000 F0H
43H
01000011
0000nnnn 0NH
62H
01100010
0sssssss SSH
TTH
0ttttttt
GGH
0ggggggg
0mmmmmmm MMH
LLH
0lllllll
0vvvvvvv VVH
: :
0kkkkkkk KKH
F7H
11110111
The detail are the same as for 2.2.1 XG Bulk Dump. However, see Tables <2-
n> for the Address, Byte, Count, and block.
2.2.2.1 PLG150-DX Naitve System bulk dump
This message sets the PLG150-DX SYSTEM block (see Tables <2-1> and
<2-2>).
2.2.2.2 PLG150-DX Multi Part bulk dump
This message sets the PLG150-DX Multi Part block (see Tables <2-1> and
<2-3>).
2.2.3 DX bulk dump
11110000 F0H
43H
01000011
0NH
0000nnnn
0ttttttt TTH
SSH
0sssssss
0ttttttt TTH
VVH
0vvvvvvv
:
:
KKH
0kkkkkkk
F7H
11110111
Address and Byte Count are given in tables <3-n>. Byte Count is indicated
by the total size of the Data in tables <4-n>.
Bulk dump is received when the beginning of the block is specified in
"Address".
Block" indicates the unit of the data string that is indicated in tables 3-n as
"Total size".
Check sum is the value that produces a lower 7 bits of 0 when the DATA, and
the Check-sum itself are added.
2.2.3.1 VCED Bulk Dump
This message sets the VCED block (see Tables <4-1> and <3-2>.
2.2.3.2 ACED Bulk Dump
This message sets the ACED block (see Tables <4-1> and <3-3>.
2.2.3.3 VMEM Bulk Dump
This message sets the VMEM block (see Tables <4-1> and <4-2>.
2.2.3.4 AMEM Bulk Dump
This message sets the AMEM block (see Tables <4-1> and <4-3>.
3. Realtime Messages

3.1 Active Sensing

a) Send
This is not transmitted.
b) Receive
After FE is received one time, if the MIDI signal does not come within 400
msec, PLG150-DX will act the same as when ALL SOUND OFF, ALL
NOTE OFF, and RESET ALL CONTROLLERS are received, and return
to the condition where has not been received once.
Exclusive status
YAMAHA ID
N:Device Number
Model ID
ByteCountMSB
ByteCountLSB
Address High
Address Mid
Address Low
Data
:
Check-sum
End of Exclusive
Exclusive status
YAMAHA ID
N:Device Number
Format No.
ByteCountMSB
ByteCountLSB
Data
:
Check-sum
End of Exclusive