Werbung
EN
6. Set the time you want using the Timer
control dial (9).
The device will start the heating process.
Once the set time has elapsed, a beep
sounds and the device switches off
automatically.
7. Pull the drawer out of the cooking
chamber by the handle (6) and place
it down on a heatresistant surface.
L
The heating process stops if the
drawer is removed from the cooking
chamber during the cooking time.
However, the timer will continue to
count down.
The heating process starts again
during the timer time when the
drawer is pushed all the way back
into the cooking chamber.
8. Take the food out of the drawer.
9. Allow the device and accessories to cool
down and then clean them (see the
"Cleaning and Storage" chapter).
CLEANING AND STORAGE
Please Note!
■
Never spray cold water onto the hot
accessories to prevent material damage.
■
Do not use any sharp or abrasive cleaning
agents or cleaning pads to clean the
device. These may damage the surfaces.
Clean the drawer (7), the insert rack (5) and
if necessary the main unit (3) after every use
to prevent germ formation and to prevent
food residues from burning. Do not allow
any food residues to dry on.
1. Make sure that the device has been
disconnected from the mains power and
has cooled down.
2. Wipe down the outside of the main unit
and the cooking chamber (4) and the
heating element with a clean, damp
cloth if necessary. Do not clean in the
dishwasher or immerse in water!
16
3. Clean the drawer and the insert rack
with detergent and warm water. The
insert rack can also be cleaned in the
dishwasher.
To preserve the quality of the parts for as
long as possible, they should preferably
be rinsed by hand.
In the case of stubborn dirt, soak them
in warm water and detergent first.
4. Allow all parts to dry completely or dry
them off.
5. Store the device and the accessories in
a clean, dry place which is not accessible
to children and animals.
TROUBLESHOOTING
If the device does not work properly, check
whether you are able to rectify the problem
yourself. If the problem cannot be solved
with the steps below, contact the customer
service department.
Do not attempt to repair an
electrical device yourself!
The device does not work.
The mains plug is not inserted in the plug
socket correctly.
►
Correct the fit of the mains plug.
The plug socket is defective.
►
Try another plug socket.
No cooking time has been set.
►
Use the Timer control dial to set a
cooking time. The device only starts
the heating process once a time has
been set.
The drawer is not fitted correctly in the
cooking chamber.
►
Slide the drawer all the way into the
cooking chamber so that the device
can start the heating process.
Werbung
