Dräger AGS Gebrauchsanweisung Seite 22

Preparation
for anaesthetic workstations
Anaesthetic machines with two exhaust ports
(waste-gas sockets), example Sulla 909 with Ventilog
Unscrew cap from second transfer hose socket on
the receiving system.
Connect both transfer hoses.
Connecting the sample-gas return hose
When the extracted sample gas is not returned,
example PM 8050 and Circle System 8
1 Connect hose to outlet for measured gas on monitor.
2 Plug the hose connector into the socket on the
receiving system until it clicks into place.
22
1
2