FP FPi 5600 Betriebsanleitung Seite 78

3. Press the [Run sheet] button.The BCR settings screen appears.
4. In the BCR settings screen, confirm that all settings are read correctly.
Note that this screen consists of two parts. Use the arrows at the bottom of the screen
to navigate between the two parts of this screen.
5. Press the [Back] button to leave the BCR settings menu.
6. Press the [Save] button to save the BCR settings that were read from the configuration
sheet.
Saving these settings will change, depending on the chosen code
type, the barcode definition for jobs where 1D or 2D BCR (if
available) is used.
7
73