Juskys Office Stand 28325 Gebrauchs- Und Montageanleitung Seite 13
Vorschau ausblenden
Andere Handbücher für Office Stand 28325:
- Gebrauchs- und montageanleitung (15 Seiten)
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.1 Moving the table up and down
►Press and hold
ble up or down.
► The table stops in the highest or lowest posi-
tion.
5.2 Saving the position
There are 2 memory locations for the height set-
ting that can be edited.
1. Press and hold
store the current height in the control unit.
2. Press
to move the table to the stored posi-
tion Position 1.
3. Press
to move the table to the stored po-
sition 2.
► The table moves automatically to the stored
position and then stops.
5.3 Resetting the position
1. Press and hold
the stored positions
2. The table starts to move to the highest po-
sition.
3. After a 3-second pause, the table moves
to the lowest position and then to the stan-
dard position.
► The table is reset.
6. Transport
CAUTION
Risk of injury and material damage due to in-
correct transport.
►Unplug the power supply from the wall so-
cket before transporting the unit.
►Only transport the product when it is disas-
sembled and with at least one other per-
son.
►Do not push the product over the ground.
/
to move the ta-
or
for 5 seconds to
for 3 seconds to reset
7. Store
NOTICE
Damage to the product due to incorrect
storage.
►Cover the product with a sheet or blan-
ket to protect it from dust when not in use
for a long period of time.
►Store the product assembled and upright
or disassembled afterwards in a dark,
cool, dry and well-ventilated place.
8. Cleaning and maintenance
NOTICE
Damage caused by incorrect cleaning
agents.
►Check the compatibility of the clea-
ning agent with the surface on an in-
conspicuous area.
►Use only cleaning cloths and soft brushes.
►Remove dust and light dirt with a damp cloth or a
soft brush.
►Use a mild, non-flammable and food-safe clea-
ning agent or a cloth dampened with water for
heavy soiling.
►Check the attachment parts and screws regular-
ly for tightness and tighten the screws if necessary.
►Replace defective or damaged parts immediately.
9. Repairing
NOTICE
Damage due to improper repair.
►Only have repairs carried out by quali-
fied personnel.
►Only use spare parts approved by the
manufacturer.
EN
13
Werbung
