will start automatically and the charge indicator
light (2.1) turns red and remains on during charging.
2. When the batteries are fully charged, the charging
process will stop automatically and the LEDs in the
charge indicator light (2.1) will turn green again.
3. Unplug the two warming gloves connectors from
the USB charger.
4. Zip up the PowerGloves.
Charging time is approximately 6-8 hours.
Note that at half time of the charging time
mentioned above, the battery is already charged at
around 75% of its maximum capacity (fast charging
process). Lab test done using Therm-ic USB wall plug
universal charger (optional).
Important advice:
• Recharge the batteries after each use to keep
them in good condition and so that your THERM-IC
warming gloves are always ready to use.
• Each battery is made up of lithium-ion cells.
It can be recharged in any state of charge.
Consequently, it is not necessary to discharge
the batteries completely before recharging.
Important:
Never try to open a battery pack! There is a danger
of explosion if the lithium-ion batteries are handled
inappropriately. There is also a danger that you will
damage the electronic components of your warming
gloves.
INSTRUCTIONS FOR USE AND DESCRIPTION
OF FUNCTIONS
These THERM-IC warming gloves have four modes:
OFF and LEVELS 1, 2 and 3. These modes are
indicated by a heating speed indicator light (fig. 1.1).
The number of LED flashes displayed indicates the
heat setting selected.
The heat setting of the THERM-IC warming gloves
can be set to 3 different levels (1, 2 and 3) using
the control zone, which consists of a single button
(fig. 1.2).
9