Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PARTS
DIAGRAM
1
2
4
5
6
ASSEMBLY
INSTRUCTIONS
A.Before assembly:
Check that you have all the components and are familiar with each part
before proceeding.
I.Make sure there is enough space for all parts before assembly.
2.Remove all parts from the plastic bag and separate them into groups.
Note: When unpacking, the front guard, rear guard and fan blades are
connected together. Please loosen the ties directly and open them.
3.To avoid scratches, it is recommended that you install the fan on a soft,
horizontal
surface.
B. Assembly instructions:
1. Place the lower pillar(5) insert into fan base (6), and tighten the fan
base and lower pillar with the included screws (5). Insert the fan body
into the lower pillar to secure the entire fan body.
Unique features: 2-in-l
This fan can be a 2-in-l type, an ordinary floor fan and a table fan, please
adjust the height is shown in the picture below.
A.Remove the lower pillar and directly insert the fan body into the fan
base to function
as a table
B.lnstall the fan main body and the lower pillar together to function as a
floor
fan.
3
fan
fan.
EN-04
1.Front grille guard
2.35cm Fan blade (7
pieces)
3.Motor housing
4.Button control panel
5.Fan body and lower
pillar
6.Fan base
Werbung
