Siemens CT636LE.6 Gebrauchsanleitung Seite 51

■ Press the water filter firmly into the
opening of the water tank�
■ Fill the water tank with water up to the
"max" mark�
■ Remove the milk tube from the milk
container and close the door�
F
Caution: Do not jam the tube when
closing the door�
■ Place a container with a capacity of
0�5 litre under the outlet �
■ Press button C�
Water will now flow through the filter to
rinse it�
■ Then empty the container�
The appliance is ready for use again�
F
Rinsing the filter simultaneously
activates the setting for the change
filter display�
The filter is no longer effective when the
"Replace water filter" display appears, or
at the latest after two months� It needs to
be replaced for reasons of hygiene and to
prevent a build-up of limescale (which could
damage the appliance)�
■ If a new filter is not inserted, select
the setting "Remove" and press button
C�
The message "Remove filter, reinsert water
tank, close door" appears�
F
If the appliance has not been used
for a prolonged period (for example,
while you are on holiday), the exist-
ing filter should be rinsed before the
first time the appliance is used again�
To do this, simply dispense a cup of
hot water�
Detailed information about the water filter
can be found in the manual supplied with
the filter.
Home Connect
Settings for connection to WLAN network
(home network) and mobile devices (see
section "Home Connect")�
Switch off after
To set how long the appliance should wait
after the last drink was prepared before it
automatically rinses and switches itself off.
You can specify values from 15 minutes to
8 hours� The factory setting is 30 minutes�
Illumination
Setting the illumination of the beverage
outlet� "On", "When in use" or "Off" can be
selected�
Brightness illumination
Setting the illumination lightness of the
beverage outlet� "Level 1" to "Level 10" can
be selected�
Brightness display
Setting the illumination lightness of display�
Key tones
Switch the signal tones on or off.
Clock display
Display option for time and date "Off" or
"Digital" (on)� The settings for this can be
changed in the next menu options�
F
If the appliance is switched off at the
mains or there is a power failure, the
settings for the time and date will be
lost�
Clock
Setting for the current time�
Date­day
Setting for the current day�
Date­month
Setting for the current month�
Date­year
Setting for the current year�
Frost protection
Service programme to prevent frost damage
during transportation and storage�
This programme completely empties the
appliance�
■ Touch [ Start ] to begin running the
programme�
■ Empty the water tank and reinsert�
Menu en
47