Whirlpool ADG 190 A+ Gebrauchsanweisung Seite 39

C. Filling the Rinse Aid Dispenser
Rinse Aid Dispenser
The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes,
which can leave spots and streaks. It also improves drying by allowing water to roll off the dishes. Your
dishwasher is designed to use liquid rinse aids. The rinse aid dispenser is located inside the door next to
the detergent dispenser. To fill the dispenser, open the cap and pour the rinse aid into the dispenser until
the level indicator turns completely black. The volume of the rinse aid container is about 110 ml.
Rinse Aid function
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing and spot/streak free drying.
Attention
Only use branded rinse aid in the dishwasher. Never fill the rinse aid dispenser with any other substances
(e.g. Dishwasher cleaning agent, liquid detergent). This would damage the appliance.
When to refill the Rinse Aid Dispenser
If there is no rinse aid warning light in the control panel, you can estimate the amount from the colour of
the optical level indicator C located next to the cap. When the rinse aid container is full, the whole
indicator will be dark. As the rinse aid diminishes, the size of the dark dot decreases. You should never let
the rinse aid level fall below 1 / 4 full.
As the rinse aid diminishes, the size of the black dot
on the rinse aid level indicator changes, as illustrated
below.
Full
3 / 4 full
1 / 2 full
1 / 4 full - Should refill to eliminate spotting
Empty
39
C (Rinse Aid
indicator)
6