Berner 219045 Bedienungsanleitung Seite 21

Explanation of display
AUTO
- - - -
HOLD
AC
DC
V
Ω, kΩ, MΩ
nF, μF
Hz, kHz
%
Technical data
The accuracy relates to 1 year used in temperatures between +18 °C – 28 °C and 75 % relative
humidity. Further annual calibration is available.
Autoranging and manual measurement
range selection
Max. voltage between the connection
socket and ground
Max. operating height:
Height of display:
Display
Polarity indicator
Overrange indicator:
Sampling rate
Low battery status:
Automatic power off
Auto power off
Auto scan and auto range
Scan status
Measured value frozen
AC voltage / current
DC voltage / current
Continuity testing
Diode testing
Battery level display
Volt
Ohms, kiloohms, megaohms (resistance)
nanofarad, microfarad (Capacitance)
hertz, kilohertz (frequency)
Percent (Duty Cycle)
300 V DC or AC rms
2000 m above MSL
20 mm LCD
Max. 1999 (3½ digits)
Automatic
'OL' is displayed
approx. 0.4 sec.
Battery symbol is displayed
After approx. 15 min
21