Haier ES50V-FE1 Anwenderhandbuch Seite 8

Installation Methods
Figure 1 Installation Schematic -
Vertical Installation
Hot water
valve
Figure 3 Installation Schematic - Horizontal Installation
(for TF7/TF7W/VH1/VH3W Series)
It must be installed according to the schematic
Hot water outlet
Hot water
valve
Cold water
valve
It must be installed by the installer belonging to the After-sales Service Department of our company
or by its designated installer. For the installation of the water heater by personnel not recognized
by our company or the use of self-provided installation materials, which results in the
consequences, including but not limited to pipeline leakage, crash, poor installation affecting the
normal operation and performance of the water heater, and adverse effects or damage to the body
of the water heater. The company will not be responsible for any losses incurred as a result.
The water heater uses wall-mounted installation.
8
(All Series)
Hot water outlet
Cold water
Water mixing
valve
valve
Cold water inlet
Nozzle
Water mixing
valve
Safety valve
Cold water inlet
Nozzle
Safety valve
Model
ES50V-FE1(EU)
f1
360mm
ES80V-FE1(EU)
307mm 620mm
Figure 2
f1
ES100V-FE1(EU)
830mm
Figure 4