Werbung
heninstallng the hobontoa cabinet,a shelf
must be installed in order to separate the
abinet from the hob as illustrated in the above
figure.This is not requiredwhen installingonto
a built-under oven.
For example, if it is possible to touch the bottom of the
productsinceit is installedontoa drawer,this section
must be coveredwith a wooden plate.
min. 15 mm
Rear view connection
Location of the connection holes shown in the
belowfigure areschematic,may vary
depending on the productmodel.Fixthem
accordingto connectionholeson yourproduct.
12/EN
holes
DANGER:
Makingconnections to differentholesis not a
good practicein terms of safetysinceit can
damagethe gas and electricalsystem.
DANGER:
Jhere aregas and electricalcomponents
contained within this hob, therefore when
fitting the mountingsprings/clampsonlyattach
the suppliedfixingsto the connectionholes
shown in this manual. Failure to observe this
advise may lead to life and property safety
Thenumberof mountingspringson your
product varies depending on product model.
Final check
1.
Operatethe product.
2.
Check the functions.
Future Transportation
•
Keepthe product'soriginalcartonandtransport
the product in it. Followthe instructionson the
carton. If you do not have the original carton,
pack the product in bubble wrap or thick
cardboard
and ta e it securel
Checkthe generalappearance of your product
or any damagesthat might haveoccurred
uring transportation.
Werbung
