NEC NP1000 Bedienungshandbuch Seite 98

Selecting Aspect Ratio and Position for Screen [Screen]
Screen Type ........... Select one of two options: 4:3 Screen or 16:9 Screen for the screen to be used. See also [Aspect Ratio].
(→ page 77)
Position ................. This feature allows you to adjust the vertical position of the image when 16:9 has been selected for the
screen type.
When 16:9 has been selected there is black area above and below the image.
NOTE: This option is available only when [16:9] is selected in [Screen Type].
NOTE:
• After changing the screen type, check the setting of [Aspect Ratio] in the menu. ( → page 77)
• [Position] is not available when [4:3] is selected for [Screen Type] or when [Letter Box] is selected for [Aspect Ratio].
• During [Keystone] or [Cornerstone] adjustment, [Screen Type] or [Position] is not available. To make available, first reset the
adjustments for [Keystone] or [Cornerstone] and then make settings for [Screen Type] or [Position]. Finally make adjustments for
[Keystone] or [Cornerstone] again. Changing [Screen Type] or [Position] may limit [Keystone] or [Cornerstone] in its adjustable
range.
88
6. Using On-Screen Menu