4. USE OF THE COOKER HOOD
4.1. CONTROL PANEL
1. Turning on/off the motor in speed 1. It is used to start and stop the motor of the cooker hood in speed 1.
2. Turning on/off the motor in speed 2. It is used to start and stop the motor of the cooker hood in speed 2.
3. Turning on/off the motor in speed 3. It is used to start and stop the motor of the cooker hood in speed 3.
4. Turn on / off the lamp. It is used to turn on and off the cooker lightings.
Timer: It is used for automatic turn-off of the cooker hood after 15 minutes. Timer mode is activated when
the desired speed is pressed for 3 seconds. The button light will blink.
4.2. USAGE OF THE COOKER HOOD
Your device has been manufactured in a suitable way for use with chimney and without chimney.
4.2.1. USE WITH CHIMNEY
Your device should be connected to a chimney in the room so that it will be able to discharge the indoor air to
outer environment. The minimum Ø120mm air escape pipe should be used. For your device to operate more
efficiently, an air escape pipe that is as short possible and having few elbows should be used.
If your device is fitted with a carbon filter, it has to be removed.
4.2.2. USE WITHOUT CHIMNEY
Carbon Filter is used in environments where there is no chimney or chimney connection is not possible. The
ambient air is filtered through a carbon filter and sent back to ambient.
In order to mount the carbon filters in their places, first the aluminum filters should be demounted. After
mounting the carbon filters in the snail block by turning them, the aluminum filters should be mounted again
(illustration 6).
Aluminum filters should also never be used when using carbon filters.
Filters can be supplied from the authorized services.
1
2
3
Illustration 6
23
4