V-TAC VT-768 Gebrauchsanweisung Seite 2

WARNING
1. Please make sure to turn off the power before starting the installation.
2. Installation should be done by certified electrician.
. 3 The light source of this luminaire is not replaceable; when the light source reaches its
end of life the whole luminaire shall be replaced.
This marking indicates that this
product should not be disposed of
with other household wastes.
PACKAGING CONTENT
1x Solar Light
INSTALLATION INSTRUCTIONS
The recommended installation height is 2-4 meters.
1. Please use measure card to mark holing positions and drill 3 holes of 6mm.
2. Install 3 expansion plugs into the holes.
3. Install 3 screws in the expansion plugs, allow the screws to protrude slightly.
4. Align the lower notch on the back of the light with the lower screw and align the
holes at the top of the light with the upper screws to fix the light well.
5. Press the button on the back of the light to turn on the light and select desired
working mode.
1x Measure Card 1x Accessory Bag
MANUAL
1x User Manual