Personnel Safety; Safety During Use; Disposal - Heidolph Unimax 1010 Bedienungsanleitung

Safety Instructions

Personnel safety

➜ Ensure that only qualified personnel operates the device.
➜ Observe the following regulations:
- Laboratory guidelines
- Accident prevention regulation
- Ordinance on Hazardous Substances
- Other generally accepted rules of safety engineering and occupational health
- Local regulations

Safety during use


➜ Wear the appropriate protective clothing when working on the device (protective
glasses and, if necessary, safety gloves).
➜ Do not use the device in potentially explosive areas. The device is not protected
against explosion. There is no explosion or ATEX protection available.
➜ Do not carry out work with naked flames in the vicinity of the device (risk of
explosion).
➜ Do not operate or assemble devices in the vicinity which are emission or radiation
sources (electromagnetic waves) for the frequency range (3*10
➜ Do not operate or assemble appliances in the vicinity of the device which constitute
emission or radiation sources for ionizing radiation or in the ultrasonic range.
➜ Do not operate the device where adiabatic compression or shock waves might occur
(shock wave combustion).
➜ Do not use substances, where the energy input due to mixing might pose a hazard.
➜ Do not spill liquids over the device or any parts of it.
➜ Remove any accidentally spilled liquids immediatly.
➜ Eliminate errors immediately.
➜ Always switch the device OFF after use.
➜ Avoid putting pressure on the display when you are not operating the device.
➜ Do not use abrasive material to clean the surface. Only wipe with damp cloth.

Disposal


➜ Check the device components for hazardous substances and solvents.
➜ Clean all components before disposal.
➜ Dispose of the device according to the appropriate national legal regulations.
➜ Dispose of the packaging material in accordance with the appropriate national legal
regulations.
8
11 15
Hz to 3*10 Hz).