Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Package contents
1
Package contents
Wired Temperature and
1x
Humidity Sensor – indoor
1x Clip-on frame
1x Mounting plate
2x Screws 3.2 x 15 mm
2x Screws 3.2 x 25 mm
1x Operating manual
2 Information about this
manual
Please read this manual carefully befo-
re operating your Homematic IP Wired
component. Keep the manual so you
can refer to it at a later date if you need
to.
If you hand over the device to other
persons for use, please hand over this
manual as well.
Symbols used:
Attention!
This indicates a hazard.
Note.This section contains impor-
tant additional information!
3 Hazard information
Do not open the device. It does
not contain any parts that need to
be maintained by the user. In the
event of an error, please have the
device checked by an expert.
For safety and licensing reasons
(CE), unauthorized change and/or
modification of the device is not
permitted.
Do not use the device if there are
signs of damage to the housing,
control elements or connecting
sockets, for example. If you have
any doubts, have the device che-
cked by an expert.
The device may only be operated
in dry and dust-free environment
and must be protected from the
effects of moisture, vibrations,
solar or other methods of heat
radiation, cold and mechanical
loads.
The device is not a toy: do not
allow children to play with it. Do
not leave packaging material lying
around. Plastic films/bags, pieces
of polystyrene, etc. can be dange-
rous in the hands of a child.
We accept no liability for damage
to property or personal injury
caused by impoper use or failure
to observe the hazard warnings. In
such cases, all warranty claims are
void. We accept no liability for any
consequential damage.
When connecting to the device
terminals, take the permissible
cables and cable cross sections
into account.
14
Werbung
