Silvercrest 366722 2101 Gebrauchsanleitung Und Sicherheitshinweise Seite 78

Press the START / STOP button
off the device.
Note: The device switches off automatically after one
minute when no button has been pressed.
Deleting a selected user memory
To delete the memory of the selected user, press the
memory button M
The average value of all measurements will appear on
the display. Next to this, "A" and the Bluetooth
fer symbol
Keep the function buttons - / +
for 5 seconds.
After successful deletion, "CL 00" will appear in the
display.
The data has been deleted.
Restoring the device to its factory
settings
You can delete all of the data saved on the device, e.g.
settings or saved measured values, by restoring the device
to its factory settings.
Proceed as follows:
With the device switched off, press the memory button
M . You will then be in the most recently selected
5
user memory. „A" will flash in the display
78 GB/IE
when the device is switched off.
5
will flash.
22
8
pressed simultaneously
7
.
4
to switch
trans-
®