Auto Mode; Dmx Mode - EuroLite LED MAT-192 DMX Bedienungsanleitung

Press the SELECT PROG button and the display shows „rdXX". Choose the sentence you would like to
delete with the UP and DOWN buttons and press the ENTER button in order to delete the sentence.
Editing Sentences
„rd11" to „rd15" are the storage sites for the newly edited sentences of the user. Each sentence can consist
of at most 30 characters. For example: sentence rd11
Press the SELECT PROG button once more. The display shows „rdXX". The sentence „rd11" can be
selected with the UP or DOWN buttons
Press the EDIT LETTER button. The display shows „..._ _ _" .
Press the buttons 2 – 9 to choose the desired letters, for example: Press button „2" once for A/a, then once
again button „2" for B/b, a third time the button „2" for C/c, etc.
You can choose between upper and lower case letters with the „1" button.
You can choose a space with the „0" button.
In case you make a mistake, you can easily correct it by using the BACK SPACE button, which corrects from
right to left.
After 2 – 3 seconds, the cursor jumps ahead, ready to create more new words.
When you have finished creating sentence rd11, press the ENTER button to confirm and save.
Note: You can only create and edit new sentences with the IR remote control!

AUTO MODE

In Auto Mode the internal programs are called up automatically in a continuous loop. Pr01 stands for the
internal sentences; Pr02 – Pr17 stands for the internal light effect programs.
LED Display Operation:
Press the MODE button. The display shows „Auto".
Press the SET UP button. The display shows „NXXX". The desired frequency of loops can be selected with
the UP or DOWN buttons from N001 – N100.
IR Remote Operation:
Press the AUTO RUN button. The display shows „Auto NXXX".
Press the AUTO RUN button once more and the display shows „NXXX. The desired frequency of loops can
be selected with the UP or DOWN buttons from N001 – N100.
Press the AUTO RUN button a third time to return to Auto Mode and to start the chosen program.

DMX MODE

The display allows you to assign the DMX fixture address, which is defined as the first channel from which
the LED MAT-192 DMX will respond to the controller.
LED Display Operation:
Press the MODE button in order to choose DMX Mode. The display shows „dXXX". The desired DMX
addresses can be selected with the UP or DOWN buttons from d001 – d512.
IR Remote Operation:
Press the DMX MODE button. The display shows „DMX dXXX".
Press the SET ADDR button. The display shows „dXXX". Press the buttons 0 – 9 in order to choose the
desired DMX addresses.
22/25 00031787.DOC, Version 1.0