Product Description And Specifications; Technical Data; Noise/Vibration Information - Bosch pss 190 ac Bedienungsanleitung

OBJ_BUCH-60-004.book Page 11 Tuesday, August 30, 2011 8:19 AM
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for dry sanding of wood, plastic, filler
and coated surfaces.

Technical Data

Orbital sander
Article number
Rated power input
Preselection of orbital stroke rate
No-load speed
No-load orbital stroke rate
Orbit diameter
Sanding sheet dimensions
— Adhesion via Velcro backing
— Attachment via clamping
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.

Noise/Vibration Information

Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 82 dB(A); Sound power level 93 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2 2
a =5.5 m/s , K=1.5 m/s .
h
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
Bosch Power Tools
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Thumbwheel for orbit frequency preselection
(PSS 250 AE)
2 On/Off switch
3 Dust box, complete (Microfilter System)
4 Sanding-sheet clamp
(PSS 190 AC/PSS 200 AC/PSS 250 AE)
5 Sanding plate
6 Sanding sheet*
7 Handle (insulated gripping surface)
8 Extraction outlet
9 Filter element (Microfilter System)
10 Vacuum hose*
11 Perforating tool*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
PSS 190 AC PSS 200 A PSS 200 AC
3 603 ... C40 1.. C40 0..
W 190
–
-1
min 12000 12000
-1
min 24000 24000
mm 2.0
mm – 93 x 185
mm 93 x 230
kg 1.6
/II
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
English | 11
PSS 250 AE
C40 1.. C40 2..
200 200 250
– –
12000 7000 – 12000
24000 14000 – 24000
2.0 2.0
– 93 x 185
– 93 x 230 93 x 230
1.6 1.6
/II /II
2 609 004 199 | (30.8.11)
2.0
1.6
/II