Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Maintenance and care
• Your tool does not need any special care, though in time you
should check the parts that will wear out under normal working
conditions. This includes checking and replacing shut-off
graphite brushes and the lubricant in the reducing gearbox. We
suggest that you contact our authorized Service Centers.
!
Keep the tool and supply cord clean. Wipe the surface of the
tool with a soft cloth.
!
Ventilation slots must be cleaned regularly. Clean them with
a brush or compressed air.
!
It is not allowed to use household cleaning agents that
contain petrol, trichloroethylene, ammonia and chlorides.
These substances corrode and damage plastic parts of the
tool.
Servicing
!
In case of electric or mechanical damage take the power tool
to one of the officially registered Perles Service Centers.
Each individual tampering with the tool can be dangerous.
!
Repair in unauthorized service centers are performed at your
own risk.
!
If the replacement of the supply cord is necessary, this has
to be done by Perles or an authorized Perles service agent in
order to avoid a safety hazard.
Service drawings spare parts information and addresses of Service
Centers are also available on: www.perles.com
GENERAL INFORMATION ABOUT
GUARANTEE
Guarantee is offered according to legal provisions that are valid in
individual countries.
Guarantee does not cover:
– Regular maintenance,
– Wear-and-tear materials (change of carbon brushes, grease,
etc.),
– Enclosed accessories,
– Damages caused by inappropriate use,
– Damages caused by not using original accessories,
– Damages due to normal wear, and
– Damages caused by overloading.
If any repairs are required, take the tool to the nearest authorized
service centre. Do not dissemble the tool by yourself!
Guarantee terms and the list of service centres are written on the
guarantee card.
WASTE DISPOSAL AND
ENVIRONMENT PROTECTION
The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
!
Do not dispose of power tools into household
waste!
Only for EC countries:
According the European Guideline 2012/19/EU for
Waste Electrical and Electronic Equipment and its
implementation into national right, power tools that
are no longer usable must be collected separately and
disposed of in an environmentally correct manner.
EN
13
Werbung
