Herunterladen Diese Seite drucken

Midea 4048164118687 Installationsanleitung Seite 11

Universalhalterung

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
4
Attach steel rope to
the bracket as shown
above.
7
Hook the bracket over
the hand rail and feed
the rope through the
designated slot of the
bracket hook.
9
Place the Outdoor Unit on
the bracket, aligning the
channels on the Outdoor
Unit Mount to the rails on
the French Balcony
Bracket.
5
Feed the steel rope over
the hand rail and back
to you.
8
Use the tightening straps to secure the bracket and
avoid the bracket wobbling. For balconies with
horizontal bars, try to adjust the length of the bracket
so that the bottom of the Bracket Extension rests
against the horizontal bar.
10
Slide the Outdoor Unit
gently forward until it is fully
inserted into the bracket
and can go no further.
The installation is complete.
04
6
Steel rope
(excess length
min 2 cm)
Nib
Locking
mechanism
Attach the other end of
the steel rope, to one of
the eyelets at the back of
the indoor unit.
EN

Werbung

loading