Brinno TLC200 Pro Bedienungsanleitung Seite 6

How Our Power Saving Technology Works
At The Set Up Screen After 10 seconds without activity on the set
up screen, the camera will go to Preview screenautomatically.
can press the MENU or TIME button to go back to the set up screen.
At Preview Screen After 50 seconds without activity on the set up
or preview screen,the LCDscreenwill Turn offautomatically to save
power. You can press the 0K button to wake up camera.
1. Open battery door. 2. Insert 4 AA batteries. 3. Closebattery door.
A Besurethe batterycoverislockedinto place.
1. Open SD card cover. 2. Insert SD card until it clicks into place. 3.
Close SD card cover.
1. Rotate the Power switch to the ON position. 2. Process screen
It may display
"Display Icons" 3. Set Up screen.
1. Press the MENU button
Setting, select Set Date & Time and press 0K. 3. At the highlight
field, press MENU (4- ) to decrease value, press TIME B
increase value press 0K to confirm and go to the next field. When
finished press 0K to exit set up.
In Time Lapse Mode, the camera will take one photo at the capture
interval you selected. When you are finished recording, the camera
will convert those photos into a time lapse video! Before you begin
recording, you can change the "Time Lapse FrameRate".
Output file format:AVI.
Time Lapse video length: The maximum
ranges between 8,192 to 20,480 frames, depending on the capture
interval setting.
Installing
Installing
Turning
other information
Setting the Time
to go to Setting
Mode
(Without audio) Resolution:720P
the Batteries
SD Card
on the Camera
on screen, please refer to
and
MORE 2. At MORE
Time Lapse
size of each single AVI file
You
Date
) to
Mode
ENGLISH 05