Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Service interface
The device has a service interface on the front panel. This interface has no relevant
function for the user in normal operation.
Debug, error and status messages can be displayed in a terminal emulator (e.g.
HyperTerminal or PuTTY). A service menu gives technicians the option of reading out
information about the device, resetting the device to the factory settings or perform-
ing a restart.
The service menu can be operated via any terminal emulator. Use a service cable to
connect the computer on which the terminal emulator is installed with the Service
port of the device.
How to establish a connection within the terminal emulator:
NOTE:
Before establishing a connection using the terminal emulator, install the
device driver CP210x USB to UART Bridge VCP.
This driver provides the Service port of the
service cable, as virtual serial interface (COM port). Now, the virtual interface can be
selected in the terminal emulator to establish the connection.
The driver is provided as download on the website
G&D > Tools & drivers
.
1. Start any terminal emulator (e.g. HyperTerminal or PuTTY).
VisionXS-IP
system, which is connected via
www.gdsys.com/en
G&D VisionXS-IP-F-TypeC-UHR · 21
Installation
under
More from
Werbung
