Bose Professional FreeSpace FS4SE Installationsanleitung Seite 5

BoseProfessional.com
Wiring the Loudspeaker
Wire Gauge
The FreeSpace FS4SE loudspeaker is designed to work with 18 AWG (0.8 mm
Connection Diagrams
Expose six millimeters (1/4 inch) of bare wire to attach to the terminals.
Note: The loudspeaker is not
rated for use with a rigid conduit.
The loudspeaker is suitable
for a flexible conduit or wiring
connection only.
Note: Wiring method must be in
accordance with:
In Canada, CSA C22.1, Canadian
Electrical Code, Part I, Safety
Standard for Electrical
Installations, Section 32;
In the United States, The National
Electrical Code, NFPA 70.
Loudspeaker Settings
Using a Safety Cable
Some regional construction codes require the use
of a secondary method of securing loudspeakers to
support structures to provide additional safety. Choose
a mounting position, method, and hardware consistent
with local building codes and regulations.
A safety cable can be attached to the loudspeaker using
the threaded inserts on the sides of the enclosure.
See the diagram to the right for safety attachment
points.
The side inserts (1) are sized for M8 screws with a depth
of 10 millimeters (0.39 inches)..
Installation Guide • FreeSpace FS4SE
) to 14 AWG (2.1 mm
2
70/100V
2.5W 5W
5W 10W
* Factory default
Transformer Tap Setting
Set tap by turning. Use a flat head screwdriver.
) size wire only.
2
8Ω
70V
10W 20W
20W 40W
100V
** NC: No Connection (do not use)
q
45°
30°
15°
0°
15°
30°
45°
Setup
40W*
8Ω
NC**
English • 5