Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Remove the four transport bolts to the front.
• Insert the enclosed cover caps.
• Before further transport: Reinsert the transport
bolts in reverse order.
Installation location
• The site should be located near the water inlet
and outlet, as well as near a properly grounded
power socket.
• Good ventilation around the appliance is required,
to dissipate the heat properly. Enough clearance
must be created for this purpose.
• The free space in front of the unit should be so
that the appliance door can be opened without
hindrance.
• Make sure that the floor on which the appliance is
installed, is even, heat-resistant and clean.
• Take care of a solid and horizontal position of the
appliance. If the appliance is not horizontally lev-
eled, adjust the feet accordingly (see
the feet"
).
• Power cord and water hoses may not kinked or
squashed.
• The wall socket must be freely accessible.
• Avoid the installation:
-
near heaters, next to a stove, direct sunlight or
any other heat sources;
at locations with high humidity (e.g. outdoors),
-
as metal parts would be susceptible to corro-
sion under such circumstances;
in rooms where the temperature could drop
-
below freezing. Do not expose the appliance
any weather.
near volatile or flammable materials (e.g. gas,
-
fuel, alcohol, paint, etc.).
Appliance and installation dimensions
WARNING:
For reasons of electrical and mechanical safety, it is
not allowed to remove the appliance top!
Unit in mm
A
595
The appliance can only be positioned under a work-
ing plate if the minimum distances can be adhered as
shown in the illustration.
"Adjusting
Unit in mm
G 25 mm
Adjusting the feet
CAUTION:
The feet must never be removed. Do not restrict the
floor clearance through carpets, strips of wood or
similar. Danger of heat accumulation!
30
B
C
D
845
385
435
H 25 mm
E
F
465
920
I 50 mm
Werbung
