Herunterladen Diese Seite drucken

Staubli PV-KBT4-EVO 2A/ Serie Montageanleitung Seite 10

Vorschau ausblenden Andere Handbücher für PV-KBT4-EVO 2A/ Serie:

Werbung

Technische Daten
Typenbezeichnung
Steckverbindersystem
Bemessungsspannung
Bemessungsstrom (IEC)
Bemessungsstrom (UL)
Bemessungsstossspannung
Umgebungstemperaturbereich
Temperaturbereich Transport/Lagerung
Relative Luftfeuchtigkeit Transport/Lagerung
Obere Grenztemperatur
Schutzart, gesteckt
Schutzart, ungesteckt
Überspannungskategorie
Kontaktwiderstand der Steckverbinder
Verriegelungssystem
Schutzklasse (IEC)
Kontaktsystem
Anschlussart
Kontaktmaterial
Isolationsmaterial
Flammklasse
Ammoniakbeständigkeit
(TÜV Rheinland zertifiziert nach
2 PfG 1911/04.2016)
TÜV-Rheinland zertifiziert nach
IEC 62852:2014+Amd.1:2020
UL zertifiziert nach UL6703
und CSA C22.2
2)
No. 182.5 (cULus Listed und UL Recognized)
JET zertifiziert
Maximale Einsatz-Höhe über Meeresspiegel
Temperatur Level nach IEC TS 63126
Die Steckverbinder sind mit Leitungen des Typs ZKLA (PV-wire) oder TYLZ (USE-2)
1)
zertifiziert worden� Die zu verwendenden Querschnitte entnehmen Sie bitte der
Tabelle 2 auf Seite 5 dieser Montageanleitung�
2)
Der Steckverbinder entspricht nur dann dem Standard UL6703, Edition 1, Revi-
sionsdatum 06/10/2021, wenn er wie in dieser Montageanleitung beschrieben
montiert wird�
3)
Die PV Steckverbinder sind auch als cULus Listed Produkte zertifiziert, obwohl das
UL Recognized Component Mark (UR) auf dem Gehäuse des PV-Steckverbinders
eingegossen ist�
10 / 12
Type designation
Connector system
Rated voltage
Rated current (IEC)
Rated current (UL)
Rated impulse voltage
Ambient temperature range
Transportation/storage temperature range
Transportation/storage relative humidity
Upper limiting temperature
Degree of protection, mated
Degree of protection, unmated
Overvoltage category
Contact resistance of plug connectors
Locking system
Class (IEC)
Contact system
Type of termination
Contact material
Insulation material
Flame class
Ammonia resistance
(TÜV Rheinland certified acc. to
2 PfG 1911/04.2016)
TÜV-Rheinland certified according to
IEC 62852:2014+Amd.1:2020
UL certified according to UL6703
C22.2 No. 182.5 (cULus Listed and UL Reco-
3)
gnized)
3)
JET certified
Maximum altitude above sea level for operation
Temperature Level according to IEC TS 63126
Technical Data
PV-KST4-EVO 2A/xy ; PV-KBT4-EVO 2A/xy
Ø 4 mm
DC 1500 V (IEC 62852:2014+Amd.1:2020)
DC 1500 V (UL)
39 A (2.5 mm²)
45 A (4.0 mm²)
53 A (6.0 mm²)
69 A (10.0 mm²)
30 A (14 AWG)
39 A (12 AWG)
50 A (10 AWG)
70 A (8 AWG)
16 kV
-40 °C ... +85 °C (IEC/UL)
-30 °C/+60 °C
< 70 %
115 °C (IEC)
IP65/IP68 (1 m, 168 h)
IP2X
III
< 0.2 mΩ
Locking type
II
MULTILAM
Crimpen/crimping
Kupfer verzinnt/Copper, tin plated
PA
UL94-V0
Q 60139020
R 60127169
and CSA
2)
E343181
1625-C4304-336
5000 m
Level 2
The connectors have been evaluated with cable types ZKLA (PV-wire) or TYLZ
1)
(USE-2)� The cross-sections to be used, please refer to table 2 on page 5 of this
assembly instructions�
2)
The connector is considered to be in compliance with UL6703, Edition 1, Revision
Date 06/10/2021 only when assembled in the manner specified by these assembly
instructions�
3)
The PV connectors have also been certified as cULus Listed products even if the
UL Recognized Component Mark (UR) is molded on the PV connector housing�
MA298
1)

Werbung

loading

Diese Anleitung auch für:

Pv-kst4-evo 2a/ serie