▪ Do not connect or use an appliance with a damaged lead
or plug. If the power lead is damaged, it must be replaced
by the distributor, its after-sales service or qualified
individuals in order to avoid any danger.
▪ This appliance must not be connected to an intermediary
connection, such as an external timer.
▪ When using an extension lead, it must be fully unwound to
prevent the cable from overheating.
▪ Always connect and disconnect the power lead when the
temperature is set to the minimum or to stop.
▪ Be careful not to obstruct the opening and vents
underneath the appliance.
▪ To prevent electric shocks, do not immerse the lead,
connector or body of the appliance in water or any other
liquid. Do not handle with wet hands.
▪ Handle this product with clean hands.
▪ Do not leave the lead hanging from a table or counter.
▪ Disconnect the plug when the appliance is not in use or
before cleaning it.
▪ Do not clean the appliance with a high or low pressure
water spray.
▪ Do not immerse the appliance in water.
▪ Do not use chlorinated products to clean stainless steel.
▪ Do not handle the appliance when hot.
▪ Do not touch the hot surfaces.
▪ Leave the appliance to cool down before handling or
cleaning it.
▪ Do not use the appliance without water.
▪ In the event of a failure, inspection and repairs must be
performed by an approved technician.
- 14 -