Introduction Of The Combi Heater; Mini Combi (Mnc); Assembly And Installation Instructions; Assembly - Sawotec MNC-23NS Bedienungsanleitung

1. Introduction of the Combi Heater

Mini Combi (MNC)

1.1.
A combination of a heater and steamer with Scent Basin.
Allows users to choose from normal sauna to steam bathing.
Its metal parts and Water Tank are made of stainless steel and the unique design of
the heating elements makes the Water Tank easy to keep clean.
Operated with an external control unit.
Its optional fiber-coated casing makes it safer and cool to touch.
Available in Standard model (3.0 kW) and Basic model (3.6 kW).

2. Assembly and Installation Instructions

2.1.

Assembly

2.1.1. Ball Valve

Before installing the Ball Valve, ensure that the drainage pipe's thread is wrapped with a teflon tape.
When attaching and detaching the Ball Valve, make sure that the valve's handle is in "close" position.
See Figure 1.
Note : Reflector must be installed
Installation des Hitzeschildes
How to install the reflector
to prevent risk of fire.
Vergewissern Sie sich, dass das
Hitzeschild auf der Rückseite des
Ofenrahmens eingerastet ist.
Make sure that the heat reflector
shield is placed at the back
part of the heater
frame.
Schrauben
Screw
Rahmen
Frame
Hitzeschild
Reflector
9