Werbung
Verfügbare Sprachen
Verfügbare Sprachen
12. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
12.1 What to do if...
Problem
You cannot activate or operate the appliance.
The appliance does not heat up.
The appliance does not heat up.
The appliance does not heat up.
The appliance does not heat up.
The lamp is turned off.
The lamp does not work.
The Food Sensor does not operate.
Err C2
Err C3
Err F102
Err F102
The display shows 00:00.
The water leaks out of the cavity embossment.
If the display shows an error code that is
not in this table, turn the house fuse off
and on to restart the appliance. If the
error code recurs contact an Authorised
Service Centre.
12.2 Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
22
ENGLISH
Check if...
The appliance is correctly connected to an electrical
supply.
The automatic switch-off is deactivated.
The appliance door is closed.
The fuse is not blown.
Lock is deactivated.
Moist Fan Baking - is activated.
The lamp is burnt out.
The plug of the Food Sensor is fully inserted into the
socket.
You removed the Food Sensor plug from the socket.
The appliance door is closed or the door lock is not bro‐
ken.
The appliance door is closed.
The door lock is not broken.
There was a power cut. Set the time of day.
There is too much water in the cavity embossment.
The necessary data for the service centre is
on the rating plate. The rating plate is located
on the front frame of the appliance. It is
visible when you open the door. Do not
remove the rating plate from the appliance.
We recommend that you write the data
here:
Model (MOD.) :
Product number (PNC):
Serial number (S.N.):
Werbung
