bürkert 8635 Betriebsanleitung Seite 129

O P
PERATING THE OSITIONER
X.limit
Limitation of the mechanical stroke range
Works setting:
This supplementary function limits the (physical) stroke to preset % values (minimum and maximum). The range of the limited stroke
is thereby set to 100 %.
If the limited stroke range is left during operation, negative or positive POS values greater than 100 % are displayed.
Limited
stroke [%]
OP 16
= 0%, = 100%
Physical stroke
[%]
Entering the start value of the stroke range in %
0..50% of the overall stroke
Entering the end value of the stroke range in %
50..100% of the overall stroke
The minimum separation between
Unlimited stroke
Limited
stroke
Operating instructions no. 803 889
and beträgt 50%
Set-point
[mA]