Loading The Laundry; Filling The Detergent And Additives - Electrolux WASL6E202 Benutzerhandbuch

18 www.electrolux.com
change the water temperature and the
spin speed.
4. If necessary, touch the other buttons
to add some functions or to set a
delayed start.
The display shows the symbol of the set
function and the digit shows the delayed
time.

10.4 Loading the laundry

1. Open the appliance door.
The display shows the maximum load for
the set programme
the laundry
The text bar on the display tells to add the
laundry.
2. Put the laundry in the drum, one item
at time. Shake the items before you
put them in the drum.
On the display the weight of the laundry
updates by steps of kg 0.5. The weight is
indicative and changes with the type of
the laundry.
If you put in the drum more
laundry than the maximum
load, the text bar tells that
you have put more than the
maximum load. You can
wash your laundry but the
water and energy
consumption increase.
Remove some items to have
the best consumption and
washing performance
The overload indication is
available only for
programmes with a maximum
load lower than the appliance
maximum load.
3. Close the door.
The text bar tells the percentage of
detergent to use.
This data is indicative and refers to the
detergent quantity for a maximum load
that the manufacturer recommends.
4. Make sure that no laundry stays
between the seal and the door.
There is a risk of water leakage or damage
to the laundry.
and the weight of
you put in the drum.
10.5 Filling the detergent and
additives
Compartment for prewash phase an
soak programme.
Compartment for washing phase.
Compartment for liquid additives
(fabric conditioner, starch).
Maximum level for quantity of liquid
additives.
Compartment for stain remover.
Flap for powder or liquid detergent.
Always obey the instructions
that you find on the
packaging of the detergent
products.
10.6 Check the position of the
flap
1. Pull out the detergent dispenser until it
stops.
2. Press the lever down to remove the
dispenser.