Advanced Clamping Tools - struers Secotom-10 Gebrauchsanweisung

Advanced Clamping Tools

Secotom-10
Instruction Manual

Place the clamping tool on the cutting table so that the securing
bolts align with the T-slot on the right hand side of the cutting
table.

Slide the clamping tool backwards and forwards to insert the
securing bolts in the T-slot.

Press the clamping tool sideways so that the positioning studs
are pressed tight against the table.

Hold the clamping tool in position and tighten the nuts to secure
the clamping tool.

Connect the clamping tool cable as described in Electrical
Connections in the Cutting Chamber on the next page.

A pop-up on the display panel confirms that the unit is now
connected.
The advanced clamping tools are fitted with a dovetail that
accommodates all our standard specimen holders for precision
cutting (a complete list is provided in the Accessories section).
11