Frequently Asked Questions - Marmitek 6 XTRA Gebrauchsanleitung

5. FREQUENTLY ASKED QUESTIONS

The A/V equipment does not respond to signals from my remote
control.
Take the following instructions into account:
x
The IR receiver has a receiving sensitivity of about 10 metres
with an acceptance angle of 60 degrees. Range is also
dependent on the remote control used.
x
If the 'IR data' light on the IR Smart Module is continuously
illuminated, the IR receiver is probably being disrupted by
another infrared signal. Try to locate the IR receiver so that it
encounters as little disruption as possible from, for example,
direct sunlight, Flat Screen TVs, (LCD, Plasma, LED),
fluorescent lighting or energy-efficient light bulbs.
x
The IR receiver works with all standard (infrared) remote
controls. The only exception (known to us) is Bang & Olufsen
(B&O).
x
Ensure that the IR receiver and the IR extender cable are
correctly connected and that these are plugged in properly.
Do you have other questions that have not been resolved by the
above information? Please go to www.marmitek.com
Invisible Control 6 XTRA | ™
SMART
11