Powerpeak FET8316P Bedienungsanleitung Seite 39

Step 4: Assembling the pedals
Attach the footplate (28 R) to the footplate support bar (29 R) with square neck carriage bolts M6*55
(61). Secure at the bottom with washer Ф6 (60), spring washer Ф6 (59) and knobs M6 (58). Attach
the left footplate (28 L) in the same way to the left footplate support bar (29 L).
Step 5: Assembling the handle-bar
Attach the plastic cover (11 L+R) to the lower swing bar (13 L+R). The covers must be positioned with
the largest opening on top because of the foam on the handles. The screw holes must be on the
outside. Attach with the self-tapping screws M4*15 (7).
Attach the plastic cover (77) to the handlebar post (76) with the self-tapping screws M4*15 (7).
Attach the handlebar (86) with two coated allen bolts M8*20 (10) and two curved washers φ8 (5).
39