Product Description; Functional Description; Switching On The Meter - VOLTCRAFT LCR-300 Bedienungsanleitung

7. PRODuCT DESCRIPTION

The measured values are displayed in a digital display together with the units and icons on the multim-
eter (referred to as DMM in the following). The measured value display of the DMM comprises up to
19,999 counts (count = smallest display value).
If the DMM is not operated for approx. 5 minutes in battery operation, it switches off automatically. This
saves battery power and extends the period of operation. Automatic switching off is deactivated when
using the optional mains unit.
The meter can be used for do-it-yourself or for professional applications.
For better readability, the DMM can also be optimally mounted with the standing bracket on the rear.

7.1. fuNCTIONAL DESCRIPTION

The individual measuring functions are selected via functional button "FUNC". Automatic area selection
is active in all measuring functions. The appropriate measurement range is set individually for each
application.
The DMM has two measuring inputs that are directly connected. Components with long connection
wires can be plugged in directly to the device and measured. Components with connections that are
too short can be contacted via the measuring lines that are connected to the sockets. The measur-
ing lines are performed in shielded 4-conductor technology to avoid measuring deviations by the line
resistors.
The display can be lighted in low light. Press the light button (14). The display lighting remains on for
about 60 seconds and switches off automatically again. To deactivate the lighting before this, push the
light button again.
7.2. SWITChINg ON ThE MEASuRINg DEIVCE
Before working with the meter, you have to insert the enclosed batteries. Insertion
and changing of the batteries is described in the chapter "Cleaning and Mainte-
nance".
The multimeter can be turned on and off using the operating button (2). Push the button briefly once
to switch the measuring device on or off. Always switch the measuring device off when it is not in use.
Deactivation is displayed with "OFF".
After activation, the measuring device is in smart AUTO-LCR mode. The measuring frequency is 1 kHz.
39