Burnhard FLINT Bedienungsanleitung Seite 22

13
Loosen the pre-assembled screws
on the back of the pellet chamber
and use them to attach the cable
suspension. Then wrap the cable
around the suspension.
ATTACH THE HANDLE AND CHIMNEY
14
Screw the handle onto the grill chamber lid.
Use the wide handle brackets for this.
2x C 2x F
15
Attach the chimney and seal to
the grill chamber – first screw it
in hand-tight, then screw it tight.
Then screw the chimney cover
onto the chimney.
2x C
2x F
2x D
42
FIX DOORS
16
2x
Attach the handles to both doors.
Use the narrow handle brackets for
this.
4x A 4x F
17
Insert the two doors into the small hole on the underlay with the bottom swivel joint first. Then pull the top
swivel joint down, align it with the top hole in the base cabinet and let it click into place.
43