Specifications - Makita FS4000 Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Lock ring
2-1. Locator
3-1. Locator
4-1. Switch trigger
4-2. Lock button
5-1. Lamp
6-1. Reversing switch lever

SPECIFICATIONS

Capacities
No load speed (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode: screwdriving without impact
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
Explanation of general view
7-1. Hook
8-1. Lock ring
8-2. Gear housing
9-1. Locator
9-2. Bit
9-3. Gear housing
9-4. Magnetic bit holder
Model
Self drilling screw
Drywall screw
-1
)
Overall length
Net weight
Safety class
) : 82 dB(A)
pA
) : 93 dB(A)
WA
value (tri-axial vector
2
) : 2.5 m/s or less
h
2
FS4000
6 mm
5 mm
0 - 4,000
269 mm
1.3 kg
ENE033-1
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
ENF002-1
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
ENG102-1
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
machine(s):
ENG204-2
Designation of Machine: Drywall Screwdriver
Model No./ Type:
sum)
FS4000,FS4200,FS4300,FS6300,FS6300R
are of series production and
Conforms to the following European Directives:
98/37/EC until December 28th 2009 and then with
2006/42/EC from 29th December 2009
ENG901-1
And are manufactured in accordance with the following
standards or standardised documents:
EN50144, EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
4
11-1. Lock button
13-1. Lock button
15-1. Swells
15-2. Trapezoidal holes
15-3. Locator holder
FS4300/
FS4200
FS4300A
6 mm 6 mm
5 mm 5 mm
0 - 4,000 0 - 4,000
269 mm 279 mm
1.4 kg 1.4 kg
/II
Corporation as
FS6300/
FS6300R
FS6300A
- -
4 mm 4 mm
0 - 6,000 0 - 6,000
279 mm 279 mm
1.4 kg 1.4 kg
ENH101-10
the responsible