Hama MagPower 5 Bedienungsanleitung Seite 5

• The charging process begins as soon as an effective induction field has been established. The status
LED (2) lights up blue. The current charge status is displayed on your device.
• If no induction connection can be established, change the position of your device if necessary (B). (For
all smartphones that do not feature MagSafe technology)
• If your device's battery is fully charged, the status LED (2) goes out once when you remove the device.
• Remove your device from the power pack's induction charging zone and switch it off by pressing the
Power button twice in quick succession. The LEDs (4) go out.
Note
• The power pack can be charged and the inductive charging function used simultaneously.
• In the wireless stand's holding device, the power pack automatically switches to charging mode
as soon as the stand is connected to a power supply. The Power button (9) on the underside of the
holder is inactive in this case. If the wireless stand is not connected via the power supply, the power
pack can be switched on via the Power button (9) by pressing it once. Press the Power button (9)
twice switch the power pack off again.
4.2.2. Charging via the power pack's USB-C output:
• connect the enclosed USB-C charging cable to the USB-C port on the power pack
(OUT 5 V / 2 A, 9 V / 1.5 A, 12 V / 1.1 A) and with the USB-C port on your device (mobile phone,
smartphone, etc.).
• In certain circumstances, the enclosed charging / connecting cable may not match the USB port on
your device. In this case, use the USB cable that came with your device.
• The charging process begins automatically. During the charging process, the LEDs (4) the power pack's
remaining available capacity.
• The current battery charge status of your device is indicated on this.
• Terminate the charging process and switch the power pack off by pressing the power button twice in
quick succession. The status LEDs go out.
• In the event that no device is connected, the power pack switches itself off automatically.
Warning - connecting devices
• Before connecting a device, check whether it can be adequately supplied with the power pack's
current delivery.
• Ensure that the total current consumption of the connected device does not exceed 2000 mA.
• Note the instructions in your device's operating manual.
• You must obey the instructions and safety notes contained therein regarding the supply of power
to your devices.
Note – optimised charging
Optimised charging means that the power pack recognises the connected device, supplies it with the
ideal current strength and therefore reduces the charging time to a minimum. Note that the power
pack's maximum current delivery is 2000 mA.
4.2.3. Charging devices with the 2in1 wireless stand
4.2.3.1. Charging devices with the inductive charging function
• The 2in1 wireless stand has an induction charging zone (5W) for Apple Airpods or other headphones
that can be charged using inductive charging technology.
• To charge your device, place it on the inductive charging zone (10). The charging process begins
automatically. The white status LED (11) indicates the charging function.
4.2.3.2 Charging devices with the USB-C port on the wireless stand
• Devices can also be charged on the wireless stand's USB-C port (12) (OUT 5V/1A).
• The port is also suitable for using a smart watch charging pad. Please ensure that the maximum output
of 5W is not exceeded.
4