Herunterladen Diese Seite drucken

Makita GA047GM201 Betriebsanleitung Seite 11

Akku-winkelschleifer

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 44
Work mode: surface grinding with anti vibration side grip
Model
GA042G
GA043G
GA044G
GA045G
GA046G
GA047G
Work mode: disc sanding with normal side grip
Model
GA043G
GA044G
GA046G
GA047G
Work mode: disc sanding with anti vibration side grip
Model
GA043G
GA044G
GA046G
GA047G
NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power tool can differ from the declared
value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
WARNING:
The declared vibration emission value is used for main applications of the power tool. However if
the power tool is used for other applications, the vibration emission value may be different.
WARNING:
Grinding thin sheets of metal or other easily vibrating structures with a large surface can
result in a total noise emission much higher (up to 15 dB) than the declared noise emission values.
Set heavy flexible damping mats or such to those workpieces to prevent them from emitting sound.
Take the increased noise emission into consideration for both the risk assessment of noise exposure and
selecting adequate hearing protection.
Declarations of Conformity
For European countries only
The Declarations of conformity are included in Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING
Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Vibration emission (a
,
h
AG
3.6
4.0
5.0
3.6
4.0
5.0
Vibration emission (a
,
h
AG
2
2.5 m/s
or less
2
2.5 m/s
or less
2
2.5 m/s
or less
2
2.5 m/s
or less
Vibration emission (a
,
h
AG
2
2.5 m/s
or less
2
2.5 m/s
or less
2
2.5 m/s
or less
2
2.5 m/s
or less
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Cordless grinder safety warnings
Safety warnings common for grinding, sanding,
wire brushing, or cutting-off operations:
1.
This power tool is intended to function as a
grinder, sander, wire brush, or cut-off tool.
Read all safety warnings, instructions, illus-
trations and specifications provided with this
power tool. Failure to follow all instructions listed
below may result in electric shock, fire and/or
serious injury.
11 ENGLISH
2
) : (m/s
)
Uncertainty (K) : (m/s
1.5
1.5
1.5
1.5
1.5
1.5
2
) : (m/s
)
Uncertainty (K) : (m/s
1.9
1.9
1.9
1.9
2
) : (m/s
)
Uncertainty (K) : (m/s
1.5
1.5
1.5
1.5
2
)
2
)
2
)

Werbung

loading