English
10
Circuit priming
Memo
Memo
Memo
Espresso
Cappuccino
Coffee
Calc
clean
Memo
Espresso
Memo
Memo
Memo
Aroma plus
Espresso
Cappuccino
Coffee
Hot water
Milk clean
Calc
clean
Automatic rinsing cycle
Memo
Memo
Memo
Aroma plus
Espresso
Cappuccino
Coffee
Hot water
Milk clean
Calc
clean
8 Press the ON/OFF button to switch on the machine.
During the initial heat-up process, fresh water flows through the internal
circuit to heat up the machine. This takes a few seconds.
1 Place a container under the hot water dispensing spout.
2 The no water light and the general warning light flash simultaneously.
-
The ESPRESSO button light lights up.
3 Press the Espresso button.
-
The machine is heating up and the ESPRESSO, CAPPUCCINO and
COFFEE buttons flash simultaneously.
When the machine has heated up, it performs an automatic rinsing cycle to
clean the internal circuit with fresh water. Water flows from the coffee spout.
1 Place a container under the coffee dispensing spout.
-
The ESPRESSO, CAPPUCCINO and COFFEE buttons flash
simultaneously.
-
The cycle ends automatically.