Update Process - SELFSAT SNIPE PRO Bedienungsanleitung

4-2. Update Process

Using SNIPE PRO Update Program, refresh the satellite data of your SNIPE PRO.
i. Update Program download
① Download the SNIPE PRO Update
Program to your PC from our
website (www.selfsat.com).
※ Download driver file, if your OS does not
support it.
② Download the newest satellite data to
your PC from our website .
※ Be sure your product location and download
correct location file.
③ Connect the controller to your PC using USB cable, then install the SNIPE PRO Update Program
you downloaded.
ii. Update the 10 satellites which are pre-stored
④
Run the SNIPE PRO update program.
⑤
Click "file" on left-upper side on program,
and click "open" to select folder which
contains downloaded satellite data.
⑥
Select folder and click the "OK" button.
⑦ When folder is opened, select file and
click the "Open" button.
⑧
The data of 10 satellites are shown to
you, but they are not modifiable by
yourself.
⑨
Check the Port Setting, then click the
"CONNECT" button.
12