Residual Heat; Clock Functions - AEG BP8615101 Benutzerinformation

Heating function
6.4 Activating a heating
function
1. Activate the appliance.
2. Select the menu: Heating Functions.
3. Press
4. Set a heating function.
5. Press
6. Set the temperature.
7. Press
6.5 Heat-up indicator
When you activate a heating function,
the bar on the display comes on. The bar
shows that the temperature increases.

7. CLOCK FUNCTIONS

7.1 Clock functions table
Clock function
If you set the time for a clock function,
the time starts to count down after 5
seconds.
ECO Roasting
to confirm.
to confirm.
to confirm.
Minute Minder
Duration
End Time
Application
The ECO functions let you optimize the energy
consumption during cooking. It is necessary to set
the cooking time first. To get more information
about the recommended settings, refer to the
cooking tables with the equivalent function.
6.6 Fast Heat Up Indicator
This function decreases the heat-up time.
To activate the function, hold
seconds. The heat-up indicator
alternates.

6.7 Residual heat

When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
Application
To set a countdown (max. 2 h 30 min). This
function has no effect on the operation of the
appliance. You can also activate it when the
appliance is deactivated.
Use to activate the function. Press
to set the minutes and
To set the length of an operation (max. 23 h
59 min).
To set the switch-off time for a heating func-
tion (max. 23 h 59 min).
ENGLISH 13
for 3
or
to start.