Steba LB 10 Gebrauchsanweisung Seite 13

1) Room temperature
2) Humidity
3) Ionization
4) Ultrasound
5) Water level
Connect the plug with the mains socket. A beep sound is heard, and the display
shows the current room temperature and humidity.
ON/OFF
BY touching the button
the device turns off again.
Ultrasound
By pressing the button you can adjust the atomization power in 3 levels.
∙ Your air humidifier always starts with the medium program
∙ The percentage of water mist in a room and the air temperature are together the
relative humidity. The correlation between mist and air is varying at the different
temperatures. The higher the temperature is, the less water mist can be in the air.
∙ In winter time the cold air comes from the outside and gets warmer by the room
temperature. The relative humidity is getting lower. The humidity must be increa-
sed by a humidifier.
∙ The relative humidity in a room should be: bedroom or living room: 45-60%
∙ sickroom: 40-50%
∙ library: 40-50%
1
9 8 7
the display shows
2
6 5
6) Water preheating
7) Sleeping mode
8) Humidity
9) Timer
By pressing the
3
4
button again
13