Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3 USING THE APPLIANCE
3.1 Information on Less Frost Technology
Thanks to the wrap around evaporator, Less Frost technology offers more efficient cooling,
less manual defrost requirement, and more flexible storage room.
3.2 Display and Control Panel
Lamp Cover
3.3 Operating your Fridge
Lighting (If available)
When the product is plugged in for the first
time, the interior lights may turn on 1 minute
late due to opening tests.
3.3.1 Temperature Set Button
This button allows setting temperature of
the fridge. In order to set values for fridge
partition, press this button.
3.3.2 Temperature Settings
• Every time you press the button, the
setting temperature will decrease.
• Settings display and you do not press any
button within the following 3 seconds.
If refrigerator has got freezer
compartment
3.3.3 Super Freeze Mode
When would it be used?
• To freeze huge quantities of food.
• To freeze fast food.
• To freeze food quickly.
• To store seasonal food for a long time.
If refrigerator is cooler
3.3.4 Super Cooling Mode
When would it be used?
• To cooling huge quantities of food.
• To cooling fast food.
• To cooling food quickly.
• To store seasonal food for a long time.
Temperature
Temperature
set button
indicator
min
eco
max
super
EN - 34
Temperature indicator
or
How to use?
• Hold down temperature set button for 5
seconds to activate super mode when set
is MAX.
• All lights will be lighted constantly.
During this mode:
If you hold down set button for 5 seconds,
super mode will be deactivated.
The super mode will be cancel
automatically after max 48 hours.
Note:Some built-in appliances may have a
stand-by mode.
3.3.5 Stand-By Mode
How to Activate?
Hold down set button for 5 seconds when
it is set for "Min". All leds are blink three
times.
How It Works?
In stand-by mode; all components will be
disabled. If user push set button while in
stand-by mode, all leds will blink three
times to show stand-by mode is active.
How To Deactivate ?
Push and hold set button until display
returns to normal working.
3.3.6 Door Open Alarm Function
If the door is left open for more than 2
minutes, the interior lighting (if available)
will start flashing.
Temperature
set button
Werbung
